Filter By:
- Bar Ends (1)
- BMX (2)
- Bottom Brackets (3)
- Brakes/Levers/Pads (23)
- Cables (9)
- Cassettes/Freewheels (10)
- Chainrings (3)
- Chains (8)
- Show More Categories
- Cranksets (2)
- Derailleurs (10)
- Handlebar Grips/Tape (8)
- Handlebars (2)
- Headsets (3)
- Pedals (14)
- Saddles/Pads (4)
- Seatposts (1)
- Shift/Brake Combinations (1)
- Shifters (8)
- Stems (3)
- Other (29)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$1.00
- Brake casing has internal lining and external plastic coating
- Length: 30m
$1.25
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.85
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
$1.99
- Thermally bonded PTFE coated slick galvanized cable for minimal friction
- Premium stainless-slick low-friction, rust-resistant cable
- Economy galvanized standard replacement cable
- 2000mm length
$4.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$5.99
- 72mm long molded brake blocks with smooth post for common cantilever brakes
$5.99
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
$5.99
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$6.99
Shimano compatible road caliper brake pads from Bontrager.
Genuine replacement parts
Reliable Bontrager stopping power for optimal operation and safety.
- Sleek brake pads and cartridges are Shimano compatible
- British Standard Compound (BS)—Long wearing pad compound
- Exceeds all US standards for brake pads—Sticky rubber for improved braking
- Sold in pairs
$6.99
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.
$7.99
Problem Solvers Crank Arm Fixing Bolts
- 8mm
- Sold as a pair
$7.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have.
Product details
- Designed for use on kids' bikes with twist shifters
- Set of two grips
Specifications
- Diameter: 22.2mm
- End Type: Closed
- Lock-on: No
- Material: Kraton Rubber
$8.30
The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight.
- Water grooves
- 7.65 contact width
- Reduced weight
- Rim Friendly Compounds
$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$8.99
- Lower cables for Odyssey's Gyro G3 (sold separately).
- Universal fit.
- Lower cables only.
$9.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.99
Standard linear pull brake pads for an economical replacement.
Genuine replacement parts
Reliable Bontrager stopping power for optimal operation and safety.
- Standard compound (STD)—All-around rubber pad compound
- Sold in pairs
$9.99
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$9.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$10.30
The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow.
Features:
- Hardened and Plated reinforced steel backbone
- Patented Angled tip plow
- Water grooves
- Pad-Lock washer system
- Available in Threaded and 2024 Aluminum Smooth Post
Black: standard compound designed for dry condition riding
Red: semi-aggressive compound for good performance
Salmon: aggressive compound for extreme weather conditions
Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$10.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$11.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
$11.99
Compatible with DUAL SIS index shifting, the Shimano Tourney TY front derailleur is perfect for 3x7 and 3x6 speed drivetrains.
- Action: TOP SWING
- Angled clamp band design
- Applicable Top-Mid tooth difference: 8T
- Chain line: 47.5/50mm
- Chain stay angle: 66-69
- Top gear teeth: 42T
- Total capacity: 18T
$12.99 - $14.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip
$12.99
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs.
- Robust composite and steel construction
- Compatible with Shimano 6- and 7-speed mountain and road systems
- Long cage for double or triple cranksets and 32T max cassette cog
- Includes frame hanger attachment for use with older frame designs
$12.99
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs.
- Robust composite and steel construction
- Compatible with Shimano 6- and 7-speed mountain and road systems
Page 1 of 5
Next page